WorkshopChanging the clamp on the paddle

Stephan Gölnitz

 · 09.04.2020

Workshop: Changing the clamp on the paddlePhoto: Daniel Simon
Workshop: Changing the clamp on the paddle
Part 4: In three steps, we explain how you can replace a defective clamp yourself.

A defective terminal is not a total loss. On the contrary. It may even be a good opportunity to retrofit a "better" clamp.

In most cases, defective clamps can simply be heated (hot air gun or plenty of hot water) and then gently twisted or levered off the pipe (previous page, top). If the clamps are completely closed, it may be necessary to use coarser means. We use the Dremel multitool to carefully slit open the clamp, if possible without damaging the paddle shaft. This can be done even more elegantly with a rope cutter, which usually melts ropes rather than cutting them.Photo: Daniel SimonIn most cases, defective clamps can simply be heated (hot air gun or plenty of hot water) and then gently twisted or levered off the pipe (previous page, top). If the clamps are completely closed, it may be necessary to use coarser means. We use the Dremel multitool to carefully slit open the clamp, if possible without damaging the paddle shaft. This can be done even more elegantly with a rope cutter, which usually melts ropes rather than cutting them.Afterwards, these completely enclosing cuffs can usually be easily levered away.Photo: Daniel SimonAfterwards, these completely enclosing cuffs can usually be easily levered away.From the screw to the clamping lever, most spare parts are available from a good SUP shop.Photo: Daniel SimonFrom the screw to the clamping lever, most spare parts are available from a good SUP shop.You can read this article and the entire SUP 1/2019 issue in the SURF app (<a href="https://www.delius-klasing.de/digital" target="_blank" rel="noopener noreferrer nofollow">iTunes and Google Play</a>) - the print edition is available <a href="https://www.delius-klasing.de/sup-special-01-2019-sup-2019-01" target="_blank" rel="noopener noreferrer nofollow">here</a>.Photo: Stephan GölnitzYou can read this article and the entire SUP 1/2019 issue in the SURF app (iTunes and Google Play) - the print edition is available here.
Share article:
Stephan Gölnitz

Stephan Gölnitz

Deputy Editor in Chief surf

Stephan Gölnitz comes from Bochum and had Holland as his home windsurfing territory for many years before moving to Munich in 1996 for the job of test editor at surf magazine. The materials engineering graduate worked as a surf instructor on the Ijsselmeer during his studies and competed for several seasons for the Essen sailing team in the Surfbundesliga and the Funboard Cup. He completed a traineeship at surf-Magazin in the test department and since then has actively accompanied almost all tests on the boom and for more than 10 years also as a photographer. Stephan has covered many thousands of test kilometers, mainly on Lake Garda and in Langebaan, but also in Egypt and Tobago. He gets his hands on over 100 new sails and boards every year as his company car. Privately, he prefers to surf with a foil on Lake Walchensee or “unfortunately far too rarely” in the waves. SUP is Stephan's second passion, which he pursued for several years at numerous SUP races. Today, he prefers to paddle on river tours with family or friends - even for several days.

Most read in category SUP